This decade, mix harvesters have change into considerably bigger and extra highly effective – and again in 2016 the Ajuria idea, designed by Alberto Seco and revealed within the pages of iVT, predicted this development. Now, Seco has returned to the design to replace it for a brand new period
When the primary model of the six-wheel Ajuria mix harvester idea was revealed within the March 2016 challenge of iVT, only some combines had been obtainable within the Class 10 class (presently outlined as exceeding 680hp). Again then, photos of Class 10 prototypes underneath testing could possibly be discovered on the web, for instance a large, huge and lengthy John Deere harvester. There have been additionally some photos of a pink machine with enormous rubber tracks that gave the impression to be a brand new Massey Ferguson.
One yr later, AGCO unveiled the primary items of this Ideally suited Collection constructed within the former Laverda plant at Breganze, Italy. The pink color had been become excessive gloss black to serve the three AGCO manufacturers: Massey Ferguson, Fendt and Challenger. By then the New Holland CR10.90 Elevation was additionally launched, with
a most energy of 653hp, because of its FPT Cursor 16 engine.
The largest headers offered by the OEMs had been the 13.10m (45ft) mounted on the North American Massey Ferguson 9895, Case IH Axial-Circulate 9240 and New Holland CR10.90. A substantial grain tank of 14,448 litres (410 bu.) was fitted within the Case IH and New Holland fashions. And, as a dimension associated to the scale of the threshing methods, the Massey Ferguson Delta 9380 was fitted with twin rotors of 4250mm size.
All these specs had been exceeded by the Ajuria idea mix with a 850hp energy unit, a 16,500-litre grain tank and headers from 50-60ft.
Assembly the design problem
In 2016, the Ajuria high-performance mix (which takes its identify from a Spanish OEM that made agricultural equipment within the first half of the twentieth century) tried to satisfy an iVT Design Problem primarily based on the next query: “What impact would including at the very least one further axle to a historically two- axled machine have on its design, dimensions and efficiency?”
The addition of an additional pair of wheels to a mix harvester would enable for the event of a higher-performance machine, supporting large masses because of the enormous header, grain tank and threshing system. The entrance bogie axle drive system would erase the necessity for twin tyre combos on a typical single entrance axle. This configuration would additionally make an extended system attainable, ultimate for successfully managing all of the straw equipped by the broader header.
The rubber tracks had considerably improved efficiency on huge combines because the introduction of the caterpillar system (which had been first developed for the Challenger farm tractors) on the Lexion vary of combines by Claas.
Nevertheless, the launch of the brand new AGCO Ideally suited opened the door to creating larger methods with totally different configurations. Since 2017, the scale of mix harvesters has stored rising to develop a correct market of Class 10 combines, and rubber observe methods have been instrumental to deal with huge masses on the entrance axle.
They’ve offered harvesters with even distribution of weight with diminished floor strain and improved tractive effort. Thus, the Ajuria II Collection Class 10 idea mix has been fitted with a pair of rubber tracks.
A high-performance market
How would the ideas of 2016 stand in at this time’s market? All OEMs have elevated the scale of grain tanks exceeding 16,500 litres and the brand new Case IF AF11 mix has reached a capability of 19,980l (567 bu.).
The previous Ajuria mix had an excessively lengthy cab, and now, it has been diminished for the tracked mannequin to depart extra room for a much bigger tank.
To extend headers width as much as 18m (60ft), the CNH group enlisted McDon, a provider of specialized headers. For the Ajuria mix, the previous 50-60ft headers had been designed as foldable items to facilitate the transport of the mix with out dismounting the header.
Ajuria’s threshing and separation system, which consists of a set of transversal concave and threshing drums and two counter-rotating diameter rotors, is the usual configuration for the present Class 10 combines market, with twin rotors measuring underneath 5m in size.
The Ajuria II Collection idea harvester retains the foldable centred unloading auger, over the grain tank, to supply really versatile grain unloading throughout the mix permitting the unload in the direction of each side.
A brand new handy entry to the cab has been designed for each side by the use of twin ladders that may be positioned on longitudinal or transversal route to supply two other ways of entry to the cab.
This text first appeared within the iVT Off-Freeway Annual 2025 which is offered to learn HERE
